• Open Daily: 10am - 10pm
    Alley-side Pickup: 10am - 7pm

    3038 Hennepin Ave Minneapolis, MN
    612-822-4611

Open Daily: 10am - 10pm | Alley-side Pickup: 10am - 7pm
3038 Hennepin Ave Minneapolis, MN
612-822-4611
Conversion of methane and carbon dioxide using catalytic membranes

Conversion of methane and carbon dioxide using catalytic membranes

Paperback

Series: Omn.Univ.Europ.

Literary CriticismChemistry

ISBN10: 6131574863
ISBN13: 9786131574863
Publisher: Ed Universitaires Europeennes
Published: Feb 28 2018
Pages: 72
Weight: 0.26
Height: 0.17 Width: 6.00 Depth: 9.00
Language: French
This study reports the development of a new process to convert methane and carbon dioxide into syngas from non-oil resources. The process uses membrane catalytic systems (MCS) that support heterogeneous catalytic reactions in gaseous phase in membrane channels. An active surface of the catalysts formed inside the micro- channels is low in term of area, but it is characterized by a high value of the catalyst surface/volume ratio, which induces a high efficiency of heterogeneous catalysis. Such MCS, having 10⌃8 pores per cm2 of surface, can be considered as a set of nano reactors. MCS are formed from alkoxy derivatives and precursor metal complex containing between 0.008 and 0.055% by weight of nano- components mono-and bimetallic active distributed evenly in the channels. For systems La-Ce/Ni-Al and Pd-Mn/Ni-Al, productivities of 10500 and 7500 l/h∙dm3 were respectively obtained at 650 C with a composition of syngas H2/СО ranging from 0.63 to 1.25 and a conversion rate of 50% with a CH4/СО2 (1/1) feed. Thus MCS is an order of magnitude more efficient than a fixed bed reactor of the same catalyst. A catalytic synergy has been demonstrated for the system Pd-Mn.

Also in

Chemistry